9.18.2025 / 5-minute read
5-тонные параллельные винтовые подъемники на заводе по производству углеродных ламп во Внутренней Монголии
Обзор
This case analysis details the material handling solution for a “lights-out factory” in Inner Mongolia Autonomous Region.
To efficiently transport finished carbon blocks between two workshops with significant level differences at a fast production pace, two parallel reciprocating lifts were deployed.
Since commissioning on August 15, 2025, the system has operated reliably under high-frequency, heavy-duty conditions with zero production-impacting issues.
Основные параметры
| Параметр | Значение |
|---|---|
| Модель | SJLT5.0-5.0 |
| Номинальная нагрузка | 5000 кг |
| Car Size | 2200×2200×1200 mm |
| Размер платформы | 2200×2200 mm |
| Required Space | 3200×2600 mm |
| Высота перемещения | 5000 mm |
| Скорость подъема | 0-30 m/min (Avg. ~20 m/min over 5m due to acceleration) |
| Станции | 2 остановки, 2 станции |
| Точность позиционирования | ±15 mm |
| Drive Unit | 22KW/380V SEW Motor (K107DRN180L4/BE30/V-22KW) |
| Система управления | PLC (Communication interfaces) |
| Pit Requirement | Pit-free installation |
Как это работает
The system employs two parallel 5-ton capacity reciprocating lifts.
Finished carbon blocks are conveyed onto the lift car (2200x2200mm) via customer-supplied roller lines.
Photoelectric sensors detect the load, triggering a 22KW SEW gearmotor to lift the cargo vertically 5 meters at speeds up to 20 m/min.
After precise positioning, the blocks are discharged into the adjacent workshop, enabling fully automated, rapid inter-floor transportation.
Проблемы
- Lights-Out Operation: Demanded extreme reliability and stability for fully automated operation with zero tolerance for downtime.
- Fast Production Pace: Required high efficiency and rapid response for very high daily cycles.
- Heavy-Duty Operation: 5-ton loads per cycle presented a significant challenge to structural integrity and the drive system.
- Ограничения пространства: Limited installation area (3380x2900mm) required precise layout, with a fit gap in the car depth direction.
- Integration Needs: Required seamless communication and control integration with customer’s roller conveyors for a fully automated line.
Решения
- Parallel Operation for Efficiency & Redundancy: Two lifts installed side-by-side meet the fast pace and provide backup during maintenance, ensuring continuous lights-out operation.
- Heavy-Duty Design: Utilized national standard steel components and an integrated car-lifting structure to ensure strength and long-term durability under 5000kg loads.
- Premium Core Components: A high-power 22KW SEW gearmotor provides robust and reliable power for high-frequency start-stop cycles.
- Multi-Layer Safety Protection:
Fall Prevention: Mechanical safety gear to fundamentally prevent car falling.
Защита от перегрузки: Integrated sensor locks the system if overloaded.
Обнаружение груза: Photoelectric sensors prevent oversized goods from causing jams.
Electrical Protection: Control system includes emergency stop, phase-loss protection, etc. - Flexible Integration: The PLC control system provides comprehensive communication interfaces and logic for easy integration with the customer’s conveyor system, enabling intelligent coordination.
RU 
EN 
ES 
PT 
FR 
KO 
DE