Industrial Tilter

Load Capacity: 1–30 tons
Roller Diameter/Spacing: 100–300 mm / 200–500 mm
Rotation Angle: 0–180° or 360°
Rotation/Conveyor Speed: 0.5–2 RPM / 0.1–0.5 m/s
Power System: Electric (380V–480V) or Hydraulic (10–20 MPa)

Load Capacity: 150–200 tons
Rotation Angle: 0–360° with safety stops
Rotation Speed: 0.1–0.5 RPM
Power System: High-pressure hydraulic drive (20–35 MPa)
Frame Design: Reinforced steel structure (Length: 8–15m; Width: 3–6m)

Combined Load Capacity: 50–300 tons
Synchronization Accuracy: ±1–5 mm (position) / ±0.5° (angle)
Rotation Speed: 0.2–1 RPM (per unit)
Power System: Hydraulic/Electric hybrid (15–30 MPa hydraulic; 380V–600V electric)
Span & Customization: 5–20m span between units (modular extensions available)

Load Capacity: 10–100 tons
Tilt Angle: 0–120°
Tilt Speed: 0.2–1.5 RPM
Power System: Hydraulic (15–25 MPa) or Electric (380V–480V)
Base Dimensions (L×W): 3m×2m – 10m×5m

Safety is paramount. All models integrate multi-layered protection systems:

• Overload sensors to halt operation if weight exceeds capacity
• Anti-slip clamping pads with pressure feedback
• Dual emergency stop buttons (control panel + wireless remote)
• Automatic lock pins at critical angles (90°/180°)

Compliance with OSHA, CE, and ISO 12100 standards. Optional explosion-proof motors and corrosion-resistant coatings available.

Most standard units are operational within 6–8 weeks from order confirmation, including fabrication, testing, and delivery. Modular designs (e.g., mobile tilters) require minimal on-site assembly—often just 1–2 days—using pre-drilled bases and plug-and-play hydraulic/electric connections. For large custom systems (e.g., dual synchronized tilters), installation may extend to 3–4 weeks due to precision alignment and calibration. We provide detailed floor plans and 3D simulations beforehand to streamline site preparation.

Customization is our strength. We adapt:

• Dimensions: Tailor length/width/height to fit cramped workshops or oversized loads.
• Clamping mechanisms: Choose from pneumatic claws, hydraulic arms, or conveyor-integrated rollers.
• Control interfaces: Options include PLC panels, IoT-enabled remote monitoring, or voice-command systems for hands-free operation.
• Material compatibility: Add non-sparking components for flammable environments or food-grade coatings for pharmaceutical use.

Yes! Our rugged designs thrive in extreme conditions:

• Temperature resilience: Operate from -20°C to 60°C with heated/cooled hydraulic reservoirs.
• Weatherproofing: IP65-rated electronics and stainless-steel frames resist dust, moisture, and chemical splashes.
• Explosion-proofing: ATEX-certified models for oil refineries or grain silos.
• Corrosion resistance: Galvanized coatings or epoxy paint for coastal or acidic environments.