26.5.2025 / 4 minute read

Fahrzeugaufzüge im Freien: Platzsparender Autotransport für mehrstöckige Parkhäuser

Überblick über das Projekt

Project Name: Four-Cylinder Four-Column Guided Car Lift (Vertical Parking Facade Solution)
Standort: Exterior of a Car Dealership Parking Building
Application: Vertical transportation of vehicles between multi-level parking floors, enabling fast, safe, and direct vehicle access to optimize space utilization and enhance customer experience.
Background:
Due to limited land area, the car dealership required a vertical transportation system to expand vehicle storage and display space. Traditional ramps occupied excessive space and were inefficient. The four-cylinder four-column guided lift was installed externally, connecting floors seamlessly for efficient vehicle transfer without affecting the building’s interior layout.

Grundlegende Parameter

ParameterSpezifikation
Load Capacity5,000 kg (Supports SUVs, sedans, etc.)
Hebegeschwindigkeit0.2–0.3 m/s (Smooth acceleration/deceleration)
Hebehöhe15–25 m (Covers 4-6 floors)
Platform Size6,000 mm (L) × 3,000 mm (W)
AntriebssystemHydraulic Synchronous Drive (Four-cylinder linkage)
Guide StructureFour Heavy-Duty Columns (Wind-resistant)
KontrollsystemIntelligent Frequency Conversion + Dual Safety Redundancy
Protection RatingIP54 (Dust/waterproof for outdoor use)
Stromversorgung380V/50Hz (Three-phase)

Die Herausforderung

  • Space Constraints & Through-Access Requirement
    • No internal installation space; required external mounting without affecting aesthetics.
    • Vehicles must drive straight in/out without reversing.
  • High Frequency & Heavy Load
    • Daily operation exceeding 50 cycles; demanded long-term reliability.
    • Heavy vehicles (e.g., SUVs) required high load capacity and platform rigidity.
  • Outdoor Environment Adaptability
    • Resistance to rain, temperature fluctuations, and corrosion.
    • Wind loads and vibrations could compromise stability.
  • Safety & User Experience
    • Risk mitigation for vehicle scratches during entry/exit.
    • Low noise and smooth operation for customer-facing usage.

Lösungen

  • Structural Design
    • Four-column guide rails + box-frame for wind resistance.
    • Through-platform design enabled bidirectional access.
    • Anti-slip steel plates + guide wheels for precise parking.
  • Hydraulic & Control System
    • Four-cylinder synchronization (≤3mm deviation).
    • Intelligent frequency conversion reduced mechanical wear.
    • Multi-layer safety (tilt detection, anti-drop clamps).
  • Anpassungsfähigkeit an die Umwelt
    • Hot-dip galvanized steel + anti-corrosion coating.
    • 2° inclined platform with drainage slots.
  • User Experience
    • LED floor indicators + voice guidance.
    • Low-noise hydraulic pump (≤65 dB).

Vorteile

  • Space Efficiency: External design saved internal space; 30% faster vehicle transfer.
  • Reliability & Durability: 60% lower failure rate vs. single-cylinder lifts; 6-month maintenance intervals.
  • Safety & Intelligence: Real-time monitoring + anti-skid design ensured accident-free operation.
  • Business Value: Streamlined pickup process boosted sales conversion.
  • Scalability: Modular design allowed future expansion.

Galerie

Entdecken Sie mehr
Verwandte Fallstudien

Möchten Sie Ihre Hebeausrüstung individuell gestalten?
Unser hilfsbereites Team ist für Sie da.

Angebot anfordern