VRC Cantilever Lift
VRC cantilever lift features a carriage supported by two guide columns on one side. This configuration allows easy access from three sides of the VRC and supports three loading and unloading patterns: C-loading (loading and unloading from the front), Z-loading (loading and unloading from opposite sides), and 90-degree loading (loading from the front and unloading from the side). The cantilever configuration offers greater flexibility in loading and unloading, making it especially suitable for space-constrained areas and enabling easier handling of materials.
자세히 알아보기 팀에 문의
Specification
Maximum Load Capacity
- Range: 1–5 tons
- Key Point: Single-column cantilever design concentrates loads on one side, suitable for light to medium-duty materials (e.g., small machinery parts, boxes).
Platform Dimensions
- Typical Size: 1–2.5 m (width) × 0.8–1.5 m (depth)
- Key Point: Limited depth to avoid excessive cantilever moment; requires centered loading for stability.
Maximum Lift Height
- Range: 3–15 m (vertical travel)
- Key Point: Requires reinforcement (e.g., back braces) for heights >10 m; prone to lateral sway.
Cantilever Moment
- Threshold: ≤2 kN·m (critical safety limit)
- Key Point: Exceeding this risks structural deformation or tipping—strict load positioning is mandatory
Features
🔹 Easy access from three sides: The carriage is supported by guide columns on one side, providing operational access from three sides, making loading and unloading tasks more convenient.
🔹 Flexible loading and unloading options: Supports three loading and unloading patterns: C-loading (loading and unloading from the front), Z-loading (loading and unloading from opposite sides), and 90-degree loading (loading from the front and unloading from the side), adapting to various logistics needs.
🔹 Suitable for space-constrained areas: The cantilever configuration is ideal for areas with limited space, allowing for flexible handling of materials and improving operational efficiency.
🔹 Efficient vertical transportation: Efficiently and quickly transports materials between multiple floors, reducing the time and cost of vertical transportation.
Enquire here
Options & Accessories
Loading/Unloading Enhancements
- C/Z/90° Loading Modes: Supports front (C-Type), opposite-side (Z-Type), and 90° side-loading for confined spaces.
- Extendable Bridge Plates: 0.5–1.2m ramps to bridge platform-floor gaps.
Platform Customization
- Anti-Slip Surfaces: Diamond-pattern steel or grating (friction coefficient ≥0.6).
- Modular Guardrails: Foldable/removable railings for irregular loads.
Safety Mechanisms
- Interlocked Door Systems: Prevents door opening unless the platform is aligned (ANSI/ASME B20.1 compliant).
- Mechanical Fall Arrest (e.g., SafeLock™): Auto-locks during power failure.
Smart Controls
- PLC + Touchscreen Interface: Allen Bradley integration for multi-floor presets and overload alerts.
- Wireless Remote Control: AGV/ERP compatibility for automated workflows.
Emergency Protection
- Hydraulic Safety Valves: Blocks platform descent during hose rupture.
- Overload Sensors: Mechanical/electronic shutoff for >5-ton loads.s
Our VRC Cantilever Lift is a game-changer! CE-certified with C/Z-loading, it slashed transfer times by 30% in our coastal Valencia plant. The epoxy coating resists salt corrosion, and stainless steel platform handles daily washdowns. Wireless control + predictive sensors cut downtime by 40%. Perfect for tight spaces and 3-ton loads. Local Spanish support ensured smooth setup. A cost-effective, EU-compliant beast for SMEs!
업계의 자재 취급 장비
그라딘 상품 리프트는 완제품이나 재료 또는 장비가 담긴 팔레트 적재물을 메자닌 층이나 2층에서 위아래로 운반하는 데 사용할 수 있습니다. 리프트의 플랫폼은 스테인리스 스틸로 제작되어 규정을 준수하고 부식되지 않으며 세척이 가능합니다.
근골격계 부상을 염두에 두고 다음은 생산 공정 중 제조 및 엔지니어링 부문에서 흔히 발생하는 상황의 유용하지만 전부는 아닌 목록입니다:
- 몸통에서 멀리 떨어진 곳에서 하중을 반복적으로 조작합니다.
- 짐을 들어 올리기 위해 트렁크를 반복적으로 구부립니다.
- 파악하기 어려운 매우 큰 부하입니다.
- 어깨 높이 또는 바닥 높이에서 짐을 반복적으로 취급합니다.
- 몸통을 비틀어 들어 올리는 리프팅.
- 짐은 어수선하거나 위험한 지역을 통해 장거리로 운반해야 합니다.
수작업 취급 활동이 불리한 인체공학적 조건으로 인해 부상(특히 허리)의 위험이 있는 경우, 고용주는 부상 위험을 줄이거나 제거하기 위한 조치를 취해야 한다는 것이 기본 원칙입니다.
Gradin 물품 리프트는 표준 크기의 팔레트를 제조 현장에서 메자닌 또는 1층의 창고로 운반하도록 특별히 설계되었습니다. 표준 사양이 고객의 모든 요구 사항을 충족하지 못하는 경우, 고객과 협력하여 회사, 직원 및 제품에 완벽한 최종 솔루션을 제공하기 위해 맞춤형 구성도 전문으로 제공합니다.
KO 
EN 
ES 
PT 
FR 
RU 
DE