26.5.2025 / 4 minute read

Outdoor Vehicle Elevators: Space-Saving Car Transport for Multi-Level Parking Lots

Project Overview

Project Name: Four-Cylinder Four-Column Guided Car Lift (Vertical Parking Facade Solution)
Location: Exterior of a Car Dealership Parking Building
Application: Vertical transportation of vehicles between multi-level parking floors, enabling fast, safe, and direct vehicle access to optimize space utilization and enhance customer experience.
Background:
Due to limited land area, the car dealership required a vertical transportation system to expand vehicle storage and display space. Traditional ramps occupied excessive space and were inefficient. The four-cylinder four-column guided lift was installed externally, connecting floors seamlessly for efficient vehicle transfer without affecting the building’s interior layout.

Basic Parameters

ParameterSpecification
Load Capacity5,000 kg (Supports SUVs, sedans, etc.)
Lifting Speed0.2–0.3 m/s (Smooth acceleration/deceleration)
Lifting Height15–25 m (Covers 4-6 floors)
Platform Size6,000 mm (L) × 3,000 mm (W)
Drive SystemHydraulic Synchronous Drive (Four-cylinder linkage)
Guide StructureFour Heavy-Duty Columns (Wind-resistant)
Control SystemIntelligent Frequency Conversion + Dual Safety Redundancy
Protection RatingIP54 (Dust/waterproof for outdoor use)
Power Supply380V/50Hz (Three-phase)

The Challenge

  • Space Constraints & Through-Access Requirement
    • No internal installation space; required external mounting without affecting aesthetics.
    • Vehicles must drive straight in/out without reversing.
  • High Frequency & Heavy Load
    • Daily operation exceeding 50 cycles; demanded long-term reliability.
    • Heavy vehicles (e.g., SUVs) required high load capacity and platform rigidity.
  • Outdoor Environment Adaptability
    • Resistance to rain, temperature fluctuations, and corrosion.
    • Wind loads and vibrations could compromise stability.
  • Safety & User Experience
    • Risk mitigation for vehicle scratches during entry/exit.
    • Low noise and smooth operation for customer-facing usage.

Solutions

  • Structural Design
    • Four-column guide rails + box-frame for wind resistance.
    • Through-platform design enabled bidirectional access.
    • Anti-slip steel plates + guide wheels for precise parking.
  • Hydraulic & Control System
    • Four-cylinder synchronization (≤3mm deviation).
    • Intelligent frequency conversion reduced mechanical wear.
    • Multi-layer safety (tilt detection, anti-drop clamps).
  • Environmental Adaptability
    • Hot-dip galvanized steel + anti-corrosion coating.
    • 2° inclined platform with drainage slots.
  • User Experience
    • LED floor indicators + voice guidance.
    • Low-noise hydraulic pump (≤65 dB).

Advantages

  • Space Efficiency: External design saved internal space; 30% faster vehicle transfer.
  • Reliability & Durability: 60% lower failure rate vs. single-cylinder lifts; 6-month maintenance intervals.
  • Safety & Intelligence: Real-time monitoring + anti-skid design ensured accident-free operation.
  • Business Value: Streamlined pickup process boosted sales conversion.
  • Scalability: Modular design allowed future expansion.

Gallery

Explore some more
related Case studies

Want to customize your lifting equipment?
Our helpful team are here to help.

Request a quote